Optical Information Website
Introduction of Optics and Optical Products
Optical Information Website
Introduction of Optics and Optical Products
Selection of Optical Products
Construction of Imaging System
Optical Technology Solutions
https://www.hikarimart.net
375WMetal-Halide Light Source
PCS-MH375RC
NIPPON P•I
Equipped with the industry's highest class 375W metal halide lamp.
250W Metal-Halide Lamp about 1.8 times more light than metal halide
about 1.8 times brighter (compared to PCS-UMX250)
The industry's highest level of light intensity is achieved by adopting a high-output DC lighting HID lamp.
250W Metal-Halide LampMetal-Halide Light Source.
Long life (2,000h)
Average value of time that has decreased by 40% from the initial value.
High efficiency, high power factor
A high power factor of 0.95 or more is achieved by the power factor correction circuit. Harmonic measures are perfect.
Compatible with large diameter Light Guides
Compatible with large diameter Light Guides up to bundle diameter Φ11.
Equipped with an hour indicator (LED lights in units of 500 cumulative lighting hours)
It informs you of the life of the lamp (2,000h).
Applications
Spot lighting for high-speed cameras / Simple lighting for medical use / Curing pigment paint colored resin / Inspection lighting that requires a large amount of light / Microscope illumination
Specifications
Model Number PCS-MH375RC
Rated Input Voltage AC100 ∼ 240V
Input Voltage Tolerance AC85 ∼ AC264V
Rated Frequency · Phases 50/60Hz · Singlephase
Rated Input Current 4.8A ∼ 1.9A
Power factor 0.95 or more
Power Consumption about 470W ∼ 450W
Lighting Method DC Lighting Method
Lamp Life about 2,000 hours
(When the amount of light is 40% lower than the initial value) ∗1
Lamp Model PM-375
Lamp Color Temperature about 5,000°K
Initial Luminous Flux 5,750ml ∗2
Voltage Stability ±3% or less ∗3
Dimming Method Slit Disk Transmission
Voltage Variable Range 0 ∼ 100%
Over Temperature Protection Automatic Recovery
Operating Temperature 0 ∼ 40°C
Operating Humidity 20 ∼ 85%(no condensation)
External Dimensions 172(W)×217(H)×353(D)
(excluding protrusions)
Weight about 6.7kg
Dedicated Light Guide List of Light Guides
∗1 : It varies greatly depending on the frequency of ON/OFF.
∗2 : This is the average initial value of the tip output part using PLG-1-1500-11.3R-UX350
∗3 : This is the value when the input voltage fluctuates by ±10%.

Enlarged View

Enlarged View
Light Guides
Model Number Heat Resistant Light Output Side Shape Bundling Protective
SUS Tube
Length
(mm)
PLG-1-1000-6R-UX350 UX350 Spot Type
Φ12×20mm
Φ6 Flexible 1000
PLG-1-1500-6R-UX350 UX350 Spot Type
Φ12×20mm
Φ6 Flexible 1500
PLG-1-2000-6R-UX350 UX350 Spot Type
Φ12×20mm
Φ6 Flexible 2000
PLG-1-1000-8R-UX350 UX350 Spot Type
Φ12×20mm
Φ8 Flexible 1000
PLG-1-1500-8R-UX350 UX350 Spot Type
Φ12×20mm
Φ8 Flexible 1500
PLG-1-2000-8R-UX350 UX350 Spot Type
Φ12×20mm
Φ8 Flexible 2000
PLG-1-500S-6-UX350 UX350 Spot Type
Φ12×20mm
Φ6 Interlock 500
PLG-1-1000S-6-UX350 UX350 Spot Type
Φ12×20mm
Φ6 Interlock 1000
PLG-1-1000S-8-UX350 UX350 Spot Type
Φ12×20mm
Φ8 Interlock 1000
PLG-L50-1000-8R-UX350 UX350 Line Type
Slit Length 50mm
Φ8 Flexible 1000
PLG-L100-1000-8R-UX350 UX350 Line Type
Slit Length 100mm
Φ8 Flexible 1000
PLG-L200-1500-8R-UX350 UX350 Line Type
Slit Length 200mm
Φ8 Flexible 1500
PLG-2L30-2000-8R-UX350 UX350 Line Type
Slit Length 30mm×2
Φ8 Flexible 2000
The above is an example of the corresponding Light Guides.
For more information, click here,

Options

Mechanical Shutter
· The rotary solenoid type shutter can instantly open and close the emitted light. (response speed about 40ms delay)
· A silent type is used for the rotary solenoid.
Model Number : PMS-018-0 Normally Open
Model Number : PMS-018-C Normally Close
Base for large Diameter Light Guides(Abbreviation : DK)
· A base for using Light Guides with bundle diameters (Fiber Optics) up to Φ13 ∼ Φ20.
· By using it for long line type light guides and multi-branch light guides, the flexibility of light guides that can be used with a single light source device is improved.
External power ON/OFF function (Abbreviation : NF)
· The light source power supply is turned ON/OFF by an external signal (DC24V).
∗Note : The power switch on the light source unit is disabled.
Filter Unit(Abbreviation : FU)
· A color filter unit that is manually inserted from the outside of the light source unit.
· You can choose from blue, green and yellow.
Model Number : Blue Filter : PFU-B
Model Number : Green Filter : PFU-G
Model Number : Yellow Filter : PFU-Y
Filter Changer Unit (Abbreviation : FC)
· A unit that switches filters according to an external signal.
· There are 4 slots (F1 ∼ F4) and you can choose from blue, green or yellow.
· When ordering, please specify the color for each F1 ∼ F4.

Control box for easy external control: PIF-002 is also available.
∗28-bit digital dimming, analog dimming, mechanical shutter operation, and filter switching of the filter changer can be easily operated.
Please contact us by e-mail : 
fujiwara@ff-net.jp
HikariMart / hikarimart.net

OpticalGarden Optical Information Website

about HikariMart

Business


Contact Us



Products

Cameras
USB Cameras(USB2.0/USB3.0)
GigE Vision Cameras
CameraLink Cameras
Analog Cameras
HD Cameras(HDMI/HD-SDI)
Near-infrared compatible Cameras
Lemses(CCTV/MachineVision)
Megapixel MachineVision
SWIR (Short Wave Infrared) Lenses
VariFocal Lenses
Manual Zoom Lenses
Motorized Zoom Lenses
Macro Lenses
Macro Zoom Lenses
Macro Lenses(Straight/coaxial)
Telecentric Lenses(Straight/coaxial)
Stands
Standard Stands
XYZ Mobile Stands
Coarse and fine Movement Stands
Industrial Inclined Stands
Roll-Microscope Stands
Custom-made Stands
Lighting Light Guide
Near-infrared irradiation device
Xenon Light Source Device
Metal-Halide Light Source Device
Halogen Light Source
LED Light Source
Light Guides(Fiber Optic)
Light Sources / Light Guides